!Please push down the Caps Lock keyAnswer Yes or NoA slot number must be between 0 and 7.
Enter 0 if this feature is not to be
used.Enter one of the following:
Large print limited to only one slot
Canceled.You do not have the right interface
card to do large print.
Canceled.A typical value here is Establish an automatic set-up sequence
for For Cranmer, answer No unless you are using the special "insurance method."
Do you want the voice off now?Do you have a remote keyboard?Enter input slot:Do you have a shift key mod?Do you want Echo speech?Do you want Cricket Speech?Do you want fast speech?Set the Echo parameters?Set the Cricket parameters?Enter pitch code:Do you want most punctuation?Enter volume code:Do you have a voice device for all
the material going to the screen?Enter voice device slot:Is this DECtalk?Do you have a braille device for all
the material going to the screen?Enter braille device slot:Do you have a tape-based VersaBraille?Enter VersaBraille slot:Enter VersaBraille model letter:Do you have a remote serial device to
input text through slot?Enter remote serial device slot:Forty column screen is the default.
Do you need a different screen display?How many columns in the screen display?Enter printer slot:Enter printer class:Is this a dot matrix printer?Enter printer code:Enter large print printer code:Enter font size:Enter line spacing:Enter extra spacing units between
characters:Enter brailler code:Is that what you want?Do you want HI-RES screen
in the Editor?CanceledIs this a Kurzweil Reading Machine?Enter carriage width:Enter form length:Do you want pause after form feed?Do you want auto line feed?Establish an automatic set-up sequence?Type it EXACTLY. Press Delete key to
end sequence:Do you have an extended disk system?Enter slot:Enter drive:Enter number of disk drives:How many volumes?Boot side volume?Main side volume?Do you want SlotBuster speech?Answer Yes to shut off the voice
during the configuration processAnswer Yes if you have another
device to substitute for
the Apple keyboardEThis is slow speech.
CThis is fast speech.Answer Yes to customize the
Echo speechAnswer Yes to customize the
Cricket speechfrom 0 deepest to 63 highest
Common values:
21 medium and
15 deepfrom 0 softest to 15 loudest
12 is mediumOnly answer Yes if you want ALL
the computer dialogue sent to a
serial voice deviceOnly answer Yes if you want ALL
the computer dialogue sent to a
serial braille deviceAnswer Yes to transfer chapters between Apple and VersaBraille (not VB2)Enter B, C, or D (models of the original VersaBraille)Answer Yes if you are using an
optical scanner or other serial
computer to send text to BEXAnswer Yes if you need large
print on the computer screenB - Brailler
S - Specific inkprint printer
G - Generic inkprint printer
L - Large print printer
V - Voice device
P - Paperless brailler
R - Review Class
A - Apple LaserWriter0 - none of the above1 - Apple Imagewriter
2 - Epson FX-80
0 - None of the aboveEnter 14 or 18.Line spacing is measured from
baseline to baseline.
Enter 0 for normal text.
Enter 1 or 2 to spread out characters.1  Braille Previewer
2  Braille Previewer with voice
3  Cranmer
4  M BOSS 1
5  Thiel
6  old L E D 120 using control-K
7  old L E D not using control-K
8  new L E D
9  Generic Embosser
10 T S I VersaPoint
11 Ohtsuki Brailler
12 Dipner dots embossed
13 Dipner dots printed
14 E T F 80 and I B M Typewriter
15 Camwil typeball
16 P E D plate embosser
0  None of the aboveHI-RES is slower, but is more visually
pleasing to a normally sighted user.For inkprint printer, answer Yes if
you must insert each sheet of paper
manually.Answer No. Change to Yes only if your
printer overprints each line.A set-up sequence is sent automatically
each time this device is used.
A sequence can contain commands for
the device and/or the interface card.Answer Yes for 3.5 inch, RAM or hard
drive, or more than two
5.25 inch drives.Enter 1 or 2.Enter 1 or 2.